Showing posts with label dead boot repair. Show all posts
Showing posts with label dead boot repair. Show all posts

Sunday, September 16, 2012

RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair


RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair

11.09.2012  RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair
Repairing bricked Samsung E120L is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8660 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung E120L:
  •  Solder JTAG cable to Samsung E120L JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung E120L is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.
.

http://www.jtagbox.com/jtag-news/riff-jtag-samsung-shve120l-galaxy-ii-hd-unbrick-dead-boot-repair/?utm_source=rss&utm_medium=rss&utm_campaign=riff-jtag-samsung-shve120l-galaxy-ii-hd-unbrick-dead-boot-repair

Friday, September 7, 2012

Dead boot repair notes (1)

SAMSUNG S5230-S3650 Dead phone Repair FREE!!!!!
Here Sw From SAmsung all totaly free without any box...

1. Select com Port
2. Press Start
3. Press Power On Phone
4. Err.Bootloader.
5. Disconnect.
6. DL Bootloader.
7 Press Power on Phone
8 After Job Done Write full flash with boot

B.R
Attached Files
File Type: rar GT-S3650_UART_Downloader.rar (259.8 KB,)
File Type: rar GT-S5230_UART_Downloader.rar (253.1 KB,)

Exclamation [GUIDE][GT-I9100G]Repair Totally Sleep/Dead Boot Mode Via USB

First you need to connect your phone without battery and then load usb driver windows, after install driver run bat file ,after few second ,phone repair done.

Good Luck !



http://www.mediafire.com/?4q5viaizn5zf9l0




pass: my username(moschino_luv)